Jewelry display cards with holes where you need them
Set the card size, the earring-hole diameter, spacing and height, and an optional centred hanger hole. The tool batches as many cards as fit on your paper and marks every hole centre for punching.
The PDF shows small punch-centre crosses by default so you can use a hole punch or awl of the right size; switch on hole outlines if you prefer to cut them by hand. The SVG always contains true circles for a cutting machine.
Measurement convention. Hole positions are measured from the top edge to the hole centres; the pair is symmetrical about the card centre. Every hole keeps at least 3 mm of card around it.
Cw × Ch card. Earring holes of diameter d, s apart, y from the top. Optional hanger hole dh, yh from the top. Holes keep 3 mm from edges and from each other.
Measurements
Showing the Standard card example preset. It is an editable example, not a saved design or a measured standard.
Preview
Zoom affects only this screen preview. Downloads are always at the real size.
- Cut (solid)
- Hole: punch-centre cross
- Meaning is carried by line style, not colour.
Dimensions in words
- Card size
- 50 × 70 mm
- Left earring hole centre (x, y from top-left)
- (13, 22) mm
- Right earring hole centre
- (37, 22) mm
- Earring hole diameter
- 2 mm
- Holes to punch per card
- 2
- Jewelry card: 10 copies per A4 landscape sheet (5 × 2); 1 sheet for 1.
- 1 template sheet in total.
Size and fit
- Jewelry card flat size
- 50 × 70 mm
- Paper
- A4 · Jewelry card: landscape
- Copies per sheet
- 10
- Template sheets
- 1 template sheet for 1 item
Paper and PDF options
Paper settings change the sheet layout only. They never change the product dimensions.
Border kept clear around the page. A 12 mm header and an 18 mm footer sit inside it. Allowed: 5–20 mm.
Whole number from 1 to 100. The quantity never changes the cut file.
Download
Free, no account. Files keep the generated dimensions; print at 100% and check the 50 mm ruler before cutting.
One piece per page on a page sized to the piece (jewelry card 120 × 120 mm). It is not tiled and is not meant for the paper selected above.
One file per unique piece at exact size. Quantity does not duplicate cut geometry. Assign the SCORE group to your cutter’s scoring or fold operation.
The browser cannot confirm that a file was saved or printed, so this page only reports when a download has started.
Save on this device
Nothing is saved automatically. Saving writes this tool’s validated settings and text to your browser’s local storage only: it stays on this device and disappears if browser data is cleared.
The link is the plain page address. Measurements and text are never put in links or sent anywhere.
Worked example
A 50 × 70 mm card with 2 mm holes spaced 24 mm apart and 22 mm from the top has hole centres at (13, 22) mm and (37, 22) mm measured from the card's top-left corner. With the hanger hole on, its 5 mm hole is centred at (25, 8) mm. On A4 portrait with 10 mm margins, nine cards fit per sheet, so twenty cards need three sheets of 9, 9 and 2.
The standard card preset gives these generated values:
- Card size: 50 × 70 mm
- Left earring hole centre (x, y from top-left): (13, 22) mm
- Right earring hole centre: (37, 22) mm
- Earring hole diameter: 2 mm
- Holes to punch per card: 2
How to make it
- Print at actual size Print the PDF at 100% / Actual size on cardstock. Turn off “fit to page”.
- Check the scale Measure the 50 mm ruler in the footer. Only continue when it reads 50 mm.
- Cut the cards Cut along the solid outlines with a knife and straight edge or a guillotine. Cut shared edges once where cards touch the grid gap.
- Punch the holes Punch at the small cross marks (or cut along the hole outlines if you enabled them) with a hole punch or awl that matches the hole diameter.
- Attach the jewelry Push earring posts or hooks through the paired holes. Use the hanger hole for a hook or peg if you added one; check it fits your display before printing a batch.
Check your print scale
Every template sheet carries a 50 mm ruler in its footer. Before cutting a batch, print this one-page test and measure it. It is a separate download and is not a template sheet.
One page with horizontal and vertical 50 mm references and a 50 × 50 mm square. Print at 100% and measure.
Limitations
- Rectangular plain cards only in this release. Rounded corners, necklace slits and custom outlines are on the backlog.
- Impossible hole combinations are rejected with a correction hint; holes are never silently moved or resized.
- Optional PDF text sits centred near the bottom edge and must clear the holes; it is not in the cut SVG.
- Light paper and cardstock craft construction only. This is not a shipping-box or corrugated-board engineering tool.
- Digital scale accuracy and physical fit are different claims. Paper thickness, scoring, glue and printer settings affect the assembled result; test one sample first.
- Compatibility with any particular printer, cutting machine or retail display is not promised. The SVG uses plain CUT and SCORE groups; you assign the operations in your software.
- Fraction input (such as 1 1/2) is not supported yet; use decimals.
Related guide
How to punch, cut and batch-print jewelry cards · Print at actual size · Use the cut-and-score SVG · Measure for packaging